16 Channel DC 24V PLC Relay Module With Connectors Interface Board
JR-B16PC-F
After the first PLC PLC amplification board, PLC amplifier board
has a lot of advantages, a protection PLC output point, why can
protect the PLC output?
PLC amplification boards are all with optical isolation; input and
output are amplified through the transmission of light, the input
and output are completely isolated, if the amplification tube of
the PLC amplification board is blown up, or short circuited, or the
load is short-circuited, it is not Will directly damage the PLC,
why should add the amplification board to protect the PLC, because
PLC is the core of industrial control, quite a human brain, an
electric cabinet is also almost the PLC is the most expensive
product, PLC is broken, the entire control system is used Can not
be used, the machinery can not be used, so we do PLC control system
must add PLC amplifier board, control DC load transistor amplifier
board or MOS tube amplifier board, control AC with thyristor
amplifier board.
The second advantage is that the space is small, as long as the
middle relay, solid state relay 4 points 1 space, do some mini PLC
control system preferred PLC amplification board, the third
advantage is easy to install, the maximum can do 32, 32-way as long
as the card to guide the completion of this installation, if you
use 32 intermediate relays, you want to card 32 cards, the direct
increase of 32 times the efficiency, as well as the wiring is also
very convenient, there are some dedicated PLC amplification board,
enter 40 lines , With IDC connector, 40 lines in 2 seconds, greatly
improve work efficiency
♦ Features
-- Support most of PLC output interface
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self anti-interference
-- Isolation for each relay channel
-- with relay base, easy to replace
-- with RC arc extinction circuit
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
♦ Technical data
| Model | JR-B16PC-F-FX/24VDC |
| Input interface | IDC(MIL) |
| I/O points | 8 |
| Output type | Panasonic Slim Relay |
| Wiring method | Euro terminal (slotted screws) |
| Input signal | NPN and PNP compatible |
| Input voltage | DC24V |
| Output voltage | AC/DC 0-250V |
| Output Contacts | 1NO |
| Contact capacity(resistive) | 3A 250VAC |
| Operation voltage/Release voltage | ≥75%Un/≤10%Un |
| Operation time/Release time | ≤15ms/≤8ms |
| Switching frequency | 0.1Hz |
| Applicable PLC | Mitsubishi FX series |
| Dimensions(LxWxH) | 140×87×52mm |
| Mounting | DIN rail |
