5v Eight 8 Channel Relay Module With Optocoupler Status Each Input
Indication
1 , transistor output
High-speed output: If the servo/stepper is used for output with
high operating frequency, such as temperature PID control, it is
mainly used for stepping motor control, servo control, and solenoid
valve control (high valve operating frequency).
2 , service life
Relays are mechanical components so they have a long operating
life.
Transistors are electronic components that only age and have no
limit on the number of uses.
3 , current
Transistor Current 0.2A-0.3A Relay 2A.
4 , voltage copyright transistor maximum 24V, relay can be
connected to 220V transistor DC, relay AC + DC
5 , load
When using a transistor, it is sometimes necessary to add other
things to drive large loads (such as relays, solid state relays,
etc.).
6 , relay output type
The CPU drives the relay coil to make the contact pull in, so that
the external power supply drives the external load through the
closed contact. Its open circuit leakage current is zero, and the
response time is slow (about 10ms), which can bring a large
external load;
7 , transistor output type
The CPU turns on and off the transistor through optical coupling to
control the external DC load. The response time is fast (about
0.2ms), and the external load can be small; 8. The thyristor output
type
The CPU turns on the triac through optical coupling to control the
external AC load. The open circuit leakage current is large and the
response time is fast (about 1ms).
♦ Features
-- Support most of PLC output interface-- Standard DIN rain mounted-- Status indication for each input
-- Special circuit for self anti-interference-- Isolation for each relay channel
-- with relay base, easy to replace-- with RC arc extinction circuit
♦ Typical Applications
• Micro-controller • PLC control • Servo System• Electro-magnetic valve • DC Motors• Home intelligent control
♦ Technical data
| Model | JR-B8PC-F-FPΣ/24VDC |
| Input interface | IDC(MIL) |
| I/O points | 8 |
| Output type | Panasonic Slim Relay |
| Wiring method | Euro terminal (slotted screws) |
| Input signal | NPN and PNP compatible |
| Input voltage | DC24V |
| Output voltage | AC/DC 0-250V |
| Output Contacts | 1NO |
| Contact capacity(resistive) | 3A 250VAC |
| Operation voltage/Release voltage | ≥75%Un/≤10%Un |
| Operation time/Release time | ≤15ms/≤8ms |
| Switching frequency | 0.1Hz |
| Applicable PLC | Panasonic FPΣ series |
| Dimensions(LxWxH) | 88×87×52mm |
| Mounting | DIN rail |
